Máy Phân Tích Tổng Carbon Hữu Cơ ANATEL PAT700

Hãng sản xuất: BECKMAN COULTER Máy Phân Tích Tổng Carbon Hữu Cơ (TOC)

Ứng dụng: Phân tích tổng carbon hữu cơ TOC
Model: ANATEL PAT700
Hãng sản xuất: Beckman Coulter
Nước sản xuất: Mỹ



Gọi ngay để được giá tốt nhất:
Hà Nội

Liên hệ

Nhận báo giá

ANATEL PAT700 Total Organic Carbon (TOC) Analyzers are specifically designed to help demonstrate compliance to the pharmacopoeial requirements for TOC and conductivity for Purified Water and Water For Injection.

  • TOC, Uncompensated Conductivity and Temperature from just one analyzer – can be fully calibrated and validated to USP<643> and USP<645>
  • Low cost of ownership – 12 month service and calibration intervals
  • Root-cause analysis support – water sample automatically taken if there is a TOC excursion
  • All SOPs are pre-loaded into the PAT700, leading users step-by step with on-screen pictures and prompts

Operating Range: 0.5 to 2,000 ppb as Carbon
Display Resolution: 0.1 ppb
Accuracy: ±1 ppb or ±5%, whichever is greater
Repeatability: ±0.3 ppb or ±1%, whichever is greater
Limit of Detection: 0.5 ppb
Maximum Input: 0.2 μS/cm for all waters, 1.0 μS/cm for all neutral waters
5.0 μS/cm for water with CO2 as the sole conductive species

Conductivity: Range 0.05 to 150 μS/cm (@ 25°C)
Display Resolution: 0.01 μS/cm
Conductivity Accuracy: ±2% over full range (uncompensated)
Available Conductivity Reporting Modes: Temperature compensated to 250C, or uncompensated
Available Resisitivity Reporting Mode: Temperature compensated to 250C only
Resistivity: Resistivity Range 0.2 to 18 MΩ-cm (@ 25°C)
Display Resolution: 0.01 over full range

Ambient Operating Range: 10 to 40°C (50 to 104°F)
Measurement Accuracy: ±0.4°C
Sample Water Range: 1 to 95°C (34 to 203°F)
Display Resolution: 0.1 over full range

Physical Specs
UV Lamps: 2, with UV Detect technology
Interface/Display: Color touch screen
Maximum Altitude: 4,000 m (13,125 ft)
User I/O Wiring: Three, ¾-inch conduit openings or quick disconnect fittings
Standards System: Onboard, Automated Standards Introduction System (OASIS)
Dimensions: 59.7 w X 22.9 d X 25.4 h cm (23.5 X 9 X 10 inches)
Weight: 13.6 kg (30 lbs)
Sample Inlet Flow Rate Range: 60 mL/min to 300 mL/min
Sample Inlet Pressure Range: 10 to 100 psi (69 to 690 kPa)

Analog output: 3 x 4-20mA outputs, user configurable TOC, Conductivity (uncompensated) and Sample Temperature
Digital output: 4 x digital outputs, user configurable (for alarms, etc.)
Digital input: 2 x digital inputs (for remote control)

Installation Category: II
Pollution Degree: 2, IEC 61010-1
CE Compliance: EN 61010-1 and EN 61326
Safety Rating: ETL, conforming to UL 61010-1 and CSA 22.2 No. 61010-1
Enclosure Rating: Conduit version: IP56
Quick connect version: IP46
Release tests: USP , USP , JP 16, EP 2.2.44

New Features
CIP: Selectable mode for Clean-In-Place analysis
Dual Stream option: Toggle or programmable stream switching
Excursion sampling: Minimum flow rate to fill excursion bottle = 160 mL/min
Rouge detection: Identifies oxidation cell contamination from rouging

Đã xem gần đây